Pattern Overload - Part 2

Chances are, you're suffering from it

Pattern-Overload-2
Tags

In Part 1 of this article, I demonstrated how Pattern Overload occurs and how machine training directly relates to creating Pattern Overload. In this installment I'll discuss

  1. How avoiding Pattern Overload is crucial if you care at all about your joints
  2. Tips on how to avoid Pattern Overload

Pattern Overload and Joint Health

Current research clearly shows that the nervous system is capable of not only recruiting a specific muscle needed to perform a problem movement pattern, but it can also selectively recruit specific motor units, or segments within a given muscle.(22) When motor units (MU) are recruited to perform any movement (from a Preacher curl to a snatch), the body attempts to rely on asynchronous stimulation of the working units. This is an attempt to save energy (some MUs work while the others rest) and keep movements as smooth as possible.(23)

In concert with asynchronous stimulation and up regulating motor unit activation from small to large (size principle), varying the path of resistance (bar path) is another important mechanism for conserving energy and preventing unwanted overload in specific tissues. This is clearly demonstrated by comparing the bar path of the traditional bench press and Smith machine bench press.(Figure 4) In fact, as explained in Part 1 of this article, the body is so committed to energy conservation and protecting tissues from overload, you could film the most elite lifters in the world and they would never produce the same bar path twice in a row!

In the diagram on the top, you can see an estimated natural bar path when performing a free weight bench press exercise. This bar path will change during every repetition in attempt to minimize fatigue and loading of the working tissues specific to the motor task. In the diagram on the bottom, the bar path on a Smith machine is demonstrated. It's clear that unless the athlete contorts his body below the bar while under load, the bar path is linear and unchanging. A consistent path of resistance on any machine may result in early synchronization of motor units, motor fatigue and loss of dynamic support. This is commonly associated with injury to the passive structures of working joints and often results in long-term injury!

While performing any machine exercise where there's a fixed axis of rotation or guided resistance, such as the Smith machine bench press,(Figure 4) the population of muscle fibers experiencing maximum load is isolated. The MUs and muscle fibers most suited to move the working extremity in the chosen pattern and in the movement plane dictated by the machine will experience synchronization and fatigue much sooner than when performing the same exercise with free weights, or a 3-Dimensional freedom of motion.

As the fiber population specific to the movement pattern dictated by any given machine fatigues, one is left with progressively less dynamic control over the load and working joints, often resulting in insult to the working connective tissue, tendon and muscle fibers.

As dynamic, or muscular, support for the relevant joints fail, it's common to see a lifter do one of two things. They either squirm around on the machine attempting to find new fiber populations to move the load (which is a dangerous means of changing fiber populations), or they attempt to use the stored elastic energy, or potential energy, of working connective tissues to complete the final reps of the set. Classic examples of this are bouncing the bar off the chest during the bench press, bouncing the thighs off the torso during a leg press, or springing the shoulders at end range on the pec deck machine. The result: damage to ligamentous and capsular structures of joints, not to mention the potential derangement of the joint itself!

These are no small potatoes when you consider the fact that connective tissue heals considerably slower than muscle (see side bar) and that motor control may be compromised secondary to damaged mechanoreceptors in relevant capsular and ligamentous tissues.

Muscle Tissue

Strains and minor tears heal quite quickly. This is predominantly due to the fact that muscle has an ample blood supply. Research shows only 7 days after a muscle strain, strength levels are 92.5% of maximum.(24,25)

Ligaments and Tendons

It's generally accepted that there is little, if any, regeneration of these tissues once injured.(24 (p. 19), 26) The healing times of ligaments and tendons follow the natural, four phase progression of scar tissue development and maturation. The inflammation, granulation and fibroblastic phases begin within 24 hours, with wound closure happening in 5-8 days. The final stage, maturation, lasts between six months and one year. The scar is most responsive to stretch and remodeling for 8-10 weeks, and scar tissue shrinkage completes itself between 6 months and 1 year.(27) Healing times for tendonitis will vary depending on how long it takes to identify the etiology of the problem!

Surrounding each joint is a joint capsule. This capsule is like the boot on a car's ball joints. The capsule aids in joint stability at end ranges of motion, serves to lubricate the joint surfaces with its synovial membrane and is loaded with proprioceptive neurons called mechanoreceptors.(Table 1) There are also mechanoreceptors in the ligaments surrounding joints and special pain receptors called nociceptors that may be found in the capsule, ligaments, articular fat pads and blood vessels.(28)

When an individual trains on machines with poor technique and/or overuses any form of guided resistance, the resultant fatigue and loss of motor control in the relevant movement pattern and plane of movement often leads to overload of the passive joint structures. Consisting of predominantly collagen, these structures don't stretch well and don't bounce back well from repeated stretch, either. The analogy and question I ask my patients is, "Do you remember when you last pulled a can of soda or beer from one of the six packs with plastic loops holding them together? What happened when you tried to put a full can back in the loop because no one wanted to use it at that time?" The answer is always, "It wouldn't stay in there any more." This is a simplified version of what happens when the joint capsule and/or ligaments are stretched in your body.

A joint with stretched capsular structures and articular ligaments begins to lose its optimal working relationships and eventually, particularly in the case of the shoulder, tries to fall out in positions specific to the dysfunction!

Table 1: Joint Mechanoreceptors

Joint Receptors Function
Type I Low threshold, slowly adapting static and dynamic mechanoreceptors. Tonic reflexogenic effects on neck, limb, jaw, and eye muscles. Postural and kinesthetic sensation. Pain suppression. Facilitate the tonic muscle system.
Type III Fast adapting, low threshold dynamic mechanoreceptors. Phasic reflexogenic effects on the neck, limb, jaw, and eye muscles as well as pain suppression. Facilitate the phasic muscle system.
Type III High threshold, very slow adapting receptors. Have the same characteristics as a golgi tendon organ.
Type IV High threshold, non-adapting pain provoking nerve fibers. These fibers have tonic reflexogenic effects on the neck, limb, jaw, and eye muscles. They also induce cardiovascular reflexogenic effects. Facilitation can cause guarding in the tonic muscle system.

With decreased passive support from ligamentous and capsular structures, there must be a proportionate increase of dynamic support by muscles. Should the aberrant joint complex be mildly traumatized, the intrinsic stabilizers, such as the rotator cuff of the shoulder, will be taxed with the burden of trying to maintain an optimal axis of rotation in the now dysfunctional joint complex. Should they become chronically fatigued from repeated exposure to work and exercise, coupled with the newly added burden of trying to maintain optimal working relationships in the joint, an eccentric rotation of the most mobile segment in the joint is likely.

An eccentric rotation of the joint commonly results in what chiropractors refer to as subluxation. The joint complex demonstrating some level of instability as a result of pattern overload commonly begins to make popping sounds and clunking noises that didn't previously occur. If the condition progresses, pain is associated with the unusual joint sounds and the patient can usually tell the therapist exactly what movement causes the problem; very often the movement mimics the exercise which induced the injury!

As the capsule and articular ligaments become progressively imbalanced (tight in some areas relative to other areas), there's progressive dysfunction in the proprioceptive messages being sent to the central nervous system with regard to where the joint is in space. This produces what is called a "proprioceptive deficit".

The athlete or worker with a proprioceptive deficit may establish a format for the employment of varying muscle recruitment order in an attempt to effect changes in joint position, leading to pathological motions.(29) It's common to begin noticing a loss of performance during activities that require fine motor control. For example, the exercise enthusiast with pattern overload in a shoulder, often from performing such exercises as the behind head lat pull down or pec deck with extreme ranges of motion, and who plays golf, will increasingly experience swing errors.

Side Bar: Joint and Muscle Pain = NO LONG-TERM GAIN!

Due to poor ergonomic design and/or poor exercise technique, many exercisers repetitively insult their working joints and muscles. As you can see here, pulling the bar behind the head places the arm in full horizontal abduction and full external rotation, which places maximum stress and strain on the anterior joint capsule of the shoulder. As the capsular and ligamentous structures become progressively more lax, the brain begins to receive faulty information from the articular receptors.(see Table 1) This leads to a loss of fine motor control and a progressive increase in pain and inflammation; both may lead to permanent loss of performance.

The result, as pattern overload progresses, is imbalance in the capsular and ligamentous structures of the shoulder that will not only send faulty information to the brain about proprioception,(Figure 6) but will also exhibit compensatory facilitation of key muscles around the shoulder and possibly beyond.

  1. When joint function and proprioception are optimal, the motor command leaving the brain expresses itself quite accurately in the body.
  2. When there is a proprioceptive deficit in one or more joints, the motor command leaving the brain contains the necessary information to produce the movement pattern seen in Figure A, yet it actually looks like the red overshadow in Figure B. This is often a source of frustration for athletes that have noticed a loss of performance in their sport after experiencing one or more injuries to joints.

Because the Type I mechanoreceptors are located in the most superficial portions of a joint capsule,(28) they're the first to be damaged in any case of pattern overload that includes the joint capsule and ligaments. If the joint structure is damaged enough to traumatize the deeper fibers of the capsule, there will be destruction of Type II mechanoreceptors.

This is important to understand because the Type I mechanoreceptors communicate directly with the tonic muscles of the body and the Type II mechanoreceptors communicate with the phasic muscles of the body, facilitating these muscle systems respectively.(30) (See Table 2)

Table 2: Properties of Tonic and Phasic Musculature. Modified from (31) and (32)

  Predominantly Tonic Muscles
Prone to Hyperactivity
Predominantly Phasic Muscles
Prone to Inhibition
Function Posture Movement
Susceptibility to Fatigue Late Early
Reaction to Faulty Loading Shortening Weakening
Shoulder Girdle-Arm Pectoralis Major & Minor
Levator Scapulae
Trapezius (upper)
Biceps Brachii
Scalenes
Subscapularis
Sternocleidomastoids
Masticatory
Forearm Flexors
Rhomboids
Trapezius (middle)
Trapezius (lower)
Triceps Brachii
Deep Neck Flexors
Forearm Flexors
Supraspinatus
Infraspinatus
Serratus Lateralis
Deltoid
Trunk Lumbar and Cervical Erectors
Quadratus Lumborum
Thoracic Erectors
Rectus Abdominus
Pelvis - Thigh Hamstrings
Iliopsoas
Rectus Femoris
Thigh Adductors
Piriformis
tensor Fasciae Latae
Vastus Lateralis
Vastus Medialis
Gluteal Muscles
Lower Leg - Foot Gastrocnemius
Soleus
Anterior Tibialis
Peroneals
Extensors of the Toes

When the capsule and ligament structures become overloaded and damaged, the resulting facilitation of the tonic musculature leads to the characteristic holding patterns and faulty movement patterns commonly seen by therapists and doctors. A classic example of tonic facilitation by tonic muscles surrounding the shoulder is seen in a postural holding pattern demonstrated by an elevated, forward-rounded shoulder with increased tone in the biceps, or increased postural elbow flexion. When performing movements such as lat pull downs, chin-ups, rows and shoulder abductions (with or without a dumbbell), the movement will be initiated from the upper trapezius with a shoulder-hiking action. In the case of shoulder abduction, there is often increased effort from the upper trapezius in the beginning of the motion to carry the arm through mid and upper ranges of abduction and there may be an associated pain with this movement.

The problem of pattern overload isn't just localized to "the joint that hurts" per se. Clinical experience demonstrates that pattern overload patients often complain of "abnormal nagging pains of unknown origin." This is likely to result from faulty motor recruitment of muscles at distant locations. In fact, Dvorak and Dvorak have demonstrated what they refer to as a spondylogenic reflex syndrome.(28, p. 38-40) Researchers placed traction and electrically stimulated mechanoreceptors at the C3-4 level and were able to record significant EMG (electrical activity) responses in muscles such as the sternocleidomastoid, trapezius, digastric, scalenes, triceps, rectus femoris and biceps femoris!

Their findings strongly suggest the electrical messages sent to the brain, as produced by varying intensities of stimulation and lines of pull on the joint capsule, may make the brain respond as if a corresponding preprogrammed pattern of motion were taking place. Dvorak and Dvorak identified this as distant recruitment patterns.(28) For the individual suffering from pattern overload, this may present itself as an idiopathic hamstring strain, groin strain, muscle tear or spasm in a seemingly unrelated region.

To avoid pattern overload and its many ramifications (expected and unexpected), I suggest the following precautions:

  • Avoid any machine that is ergonomically incorrect for your body.
  • It is safe to say, that of the hundreds of machines available in gyms today, a very small percentage of them were designed by engineers with any training in human biomechanics, kinesiology or ergonomics. The result... a lot of machines that do not fit a lot of people!
  • If you attempt to use a machine and it does not seem to correctly adjust to your body's dimensions, chances are it will induce mechanical trauma to your body. Some classic examples are:
  1. A shoulder abduction machine that does not adjust to the axis of motion of your shoulders. As you abduct your arms, the arm pads slide up and down your upper arm.
  2. A knee extension or hamstring curl machine that will not adjust to the axis of rotation that matches your knee joint. Again, the pads slide up and down your lower leg as you perform the exercise
  3. A biceps curl or triceps extension machine that does not adjust to fit the length of your arms, disrupting the synergy between the axis of your arm joint and the machine's joints.

In any such case as described here, it is always best and most cost effective, both now and in the long run, to look for a corresponding free weight or cable machine exercise (cable machines are classified as free weights). However, as a last resort you may look for another machine exercise that better suits your body's dimensions.

The whole concept of "training through the full range of motion" is getting out of hand! No one has ever said, "Move the weight through a full range of motion as identified by joints popping, tendons snapping, muscles straining and ligaments becoming lax!"

As I've outlined above, training through any range of motion that threatens the articular capsule and ligaments will lead to faulty neuromechanical control of your joints. This will not only significantly increase the chance of injury for the rest of your life, (with the exception of expensive rehabilitation or surgical procedures) but such faulty training methods are a likely cause of lost performance in numerous sporting events, particularly those requiring fine motor control.

Examples of machine exercises that commonly provoke injury to the body that I consistently see in a clinical setting are:

The Nautilus Lat Pull Over

A large percentage of people going to gyms suffer from lack of extension in the thoracic spine, which commonly results from crunches and sit-ups! Because of the integrated actions of the thoracic spine and shoulder during shoulder abduction and flexion (particularly beyond 140 °), while in the top position (full shoulder flexion), there's excessive disassociation of the shoulder joint. This often causes trauma to the capsuloligamentous structures and impingement of the shoulder.

The Leg Press

In any gym in the world, on any day, within any given hour, you will find some poor, mislead soul bouncing their thighs off their torso at the bottom position of the leg press. Now, this wouldn't be so bad if half of them didn't have every 45-pound plate they could gather for a country mile on the damn machine! This so-called "full ROM training" is a fantastic way to end up in a doctor's office with herniated L4-5 and/or L5-S1 discs. It's also a phenomenal way to produce spinal instability at the junction between your spine and sacrum. This is particularly important for females to pay attention to because they are generally more susceptible to ligamentous strain and stretch due to their smaller joint structures and hormonal fluctuations.

The answer? Lower the load as far as you can comfortably, without your sacrum (bottom segment of your spine) ever coming off the pad! Another tip that many of my patients have found helpful is to find a bum bag, or fanny pack, that will hold a rolled hand towel. With the hand towel rolled to the thickness of your hand at your thenar eminence (thick part of your thumb muscles), place it in the bum bag and wear it lose enough so that it can be easily maneuvered around your body from front to back. Now, whenever on the leg press or any other machine producing a load that may flatten your back, simply place the bum bag behind you with the towel roll directly behind your belly button. This will protect you from excessive flattening of your lumbar spine under load, ultimately decreasing your chances of buying an orthopedic surgeon a new BMW!

Periodize your exposure to any form of guided resistance.

It's best to limit your exposure to a machine to no more than four weeks at a time, and no more than once every 3-5 days. Additionally, you should cycle off each specific machine for a minimum of two weeks and preferably for four weeks. By alternating exercises with this suggested frequency, you'll decrease your chance of injury because you're allowing a healing response in the fatigued or traumatized tissues related to a specific pattern of motion. An added benefit is the development of more complete strength and motor skills due to the variety of motor stimulus.

With literally THOUSANDS of exercises available today, the only excuse for not being able to find alternative ways to condition any part of your body is mental laziness! My advice to you, novice or expert, is to read time-honored books on training, watch reputable training videos (I have produced about 50), search the Testosterone archives, hire a trainer, consult a knowledgeable strength coach, or simply watch individuals in the gym that appear to have more than a dozen brain cells firing at one time.

NEVER train a region experiencing joint or muscle pain.

Pain always equals inhibition in the human body! If you're training in pain, you can rest assured that the muscles crossing any joint in pain are being shut off, resulting in progressive instability of the joint(s) related to that muscle. This is directly related to Hilton's Law, which states: "The nerves which supplied the muscles and controlled the movements of the part (joint) also served the skin and other sensory surfaces which were connected with that part".(33) The net result, "no gain if you train in pain!"

If you're training in pain, you will serve yourself well to learn how to use a Swiss ball. There are many methods to assess yourself and others, as well as exercise in the decompressive manner afforded by the Swiss ball.(14, 34, 35) The Swiss ball also provides tremendous motor variety and can be used with many forms of resistance apparatus,(36) limiting your chances of pattern overload to a bare minimum!

Pattern overload is a very common, but frequently overlooked source of musculoskeletal injury. To reduce chance of injury, care should be taken to periodize the use of machines and activities that require chronic exposure to any specific movement pattern. The stabilizer system of the body should always be deemed sufficient and capable of handling the repetition and loading of any movement pattern before it's performed.

Careful attention should be given to the selection of exercises and their order of execution. Any individual suffering from pattern overload will be well served to seek advice from a professional in the field of strength and conditioning and/or orthopedic rehabilitation. Those suffering from, or wanting to prevent pattern overload in themselves or their clients, will find studying programs teaching proper exercise technique very helpful.(8, 11, 12, 13, 14, 15, 16, 34, 35, 36, 38)

Paul Chek is founder of the C.H.E.K Institute in Encinitas, CA. He has served as a consultant to professional and college sports teams, equipment manufacturers and professional athletes worldwide. He is an internationally recognized lecturer and educator in the fields of orthopedic rehabilitation, corrective and performance exercise. For more information about Paul Chek, his internship program or to request a catalog of his books, videos and products (contains seven articles), please call: US 800-552-8789, International: 760-632-6360, Australia and New Zealand 0-800-552-8789, England 44-20-8874-6942 or visit his web site at ChekInstitute.com.

  1. Chek P. Scientific Back Training (video correspondence course). C.H.E.K Institute. Encinitas, CA. 1995.
  2. Chek P. Contoversey and Current Concepts of Pulling Exercises (video). C.H.E.K Institute. Encinitas, CA. 1995.
  3. Liederman E. Muscle Building. Earle Liederman. New York, 1924.
  4. Pearl B. Keys to the Inner Universe. Bill Pearl Enterprises. 1982.
  5. Pearl B. Getting Stronger. Shelter Publications. Bolinas, CA. 1886.
  6. Poliquin C. The Poliquin Principles. Dayton Writers Group. 1997.
  7. Philips B et al. Body for Life. HarperCollins Publishers. 1999.
  8. Chek P. Movement That Matters. C.H.E.K Institute. Encinitas, CA. (In Press).
  9. Schmidt R. Motor Learning and Performance. Human Kinetics. 1991. p 178.
  10. Chek P. Advanced Program Design (correspondence course). C.H.E.K Institute. Encinitas, CA. 1997, 1999.
  11. Chek P. Scientific Core Conditioning. C.H.E.K Institute. Encinitas, CA. 1993, 1998.
  12. Chek P. Get More From Your Core. CHEK MARKS For Success. C.H.E.K Institute. Encinitas, CA. 2000.
  13. Chek P. The Golf Biomechanic's Manual. C.H.E.K Institute. Encinitas, CA. 1999.
  14. Chek P. Advanced Swiss Ball Training For Rehabilitation (video series). C.H.E.K Institute. Encinitas, CA. 1999.
  15. Hartmann J et al. Fitness and Strength Training for All Sports. Sports Books Publisher. Toronto. 1995.
  16. Chek P. Program Design (video correspondence course). C.H.E.K Institute. Encinitas, CA. 1995.
  17. McArdle D et al. Exercise Physiology - Energy, Nutrition and Human Performance (3rd. Ed.) Lea & Febiger. 1991. p 370.
  18. Childre D. Freeze Frame. Planetary Publications. Boulder Creek, CA. 1998. p. 28.
  19. Childre D et al. The Heartmath Solution. HarperCollins. 1999. p. 33.
  20. Hartmann J et al. Fitness and Strength Training for All Sports. Sports Books Publisher, Toronto 1995. p. 182-183
  21. Roman RA et al. The Snatch, The Clean and Jerk. Andrew Charniga Jr. 1982.
  22. Brown JMM et al. Functional Differentiation within Skeletal Muscle (Unpublished PhD Thesis). University of Wollongong, Australia.
  23. Guyton AC. Text Book of Medical Physiology. WB Saunders Co. 1982. p. 132.
  24. Zachazewski JE et al. Athletic Injuries and Rehabilitation. WB Saunders Co. 1996. p.85.
  25. Malone TR. Sports Injury Management - A Quarterly Series. Muscle Injury and Rehabilitation. 1999;1(3):23.
  26. Jozsa L et al. Human Tendons - Anatomy, Physiology and Pathology. Human Kinetics 1997. p. 526
  27. Cummings GS et al. Soft Tissue Changes In Contractures. Orthopedic Physical Therapy Series - Volume 1. Stokesville Publishing Co. 1985. p. 35.
  28. Dvorak J et al. Manual Medicine Diagnostics (2nd. Ed.). Thieme Medical Publications. 1990.
  29. Lephart SM et al. Proprioception and Neuromuscular Control in Joint Stability. Human Kinetics, 2000. p. 105.
  30. Rivard J et al. Joint Mechanoreceptor Update - Myofacial Pain. Manual Therapy Lesion, and Treatment. Scientific Physical Therapy 1998;8(5).
  31. Spring H et al. Stretching and Strengthening Exercises. Georg Thieme. Verlag Stuttgart 1991. p. 112-113.
  32. Lewit K. Manipulative Therapy in Rehabilitation of the Locomotor System 3rd Ed. Butterworth Heinemann3 1999. p. 26.
  33. Keith A. Menders Of The Maimed - The Anatomical & Physiological Principles Underlying The Treatment Of Injuries To Muscles, Nerves, Bones & Joints. Robert E. Kreiger Publishing Co. 1975. p. 22.
  34. Chek P. Swiss Ball Exercises For Better Abs, Buns and Backs (video). C.H.E.K Institute. Encinitas, CA. 1996.
  35. Chek P. Swiss Ball Exercises For Athletes (video set). C.H.E.K Institute. Encinitas, CA. 1996.
  36. Chek P. Advanced Swiss Ball Training For Rehabilitation. C.H.E.K Institute. Encinitas, CA. 2000.
  37. Chek P. Strong 'N' Stable. C.H.E.K Institute. Encinitas, CA. 1997.
  38. Chek P. Is Your Routine Out Of Order? Muscle Media Magazine. May 1998.
  39. Chek P. Gym Instructor Video Series. C.H.E.K Institute. Encinitas, CA. 1998.