Locked and Loaded

Loading Patterns for Strength and Muscle Gains

Besides exercise selection, the most important factor involved in developing size and strength is the nature of the load. This is a function of three separate but interrelated elements:

  1. The magnitude of the load (amount of weight used)
  2. The number of reps per set (dictated by the magnitude of the load)
  3. The loading pattern

Intensity, Hypertrophy, and Training Experience

Your body adapts to training-induced stress by making itself stronger and more resistive to physical loading. In simpler words, the more experienced a trainee is, the better his body is built to tolerate training stress.

To explain that fact, we can use a simple analogy: A man starts to work a physically demanding job (e.g. farm work). He does manual labor tasks eight hours a day. At first he'll get extremely tired by the end of the day and be painfully sore the next morning. But over time, the more experienced he becomes at his job, the daily workload doesn't affect his body as much. His body has adapted to the very brutal physical demands of his work.

Same goes for strength training (which is basically artificial manual labor). The more years a trainee has put in, the better his body is at handling training related stress. So it should be obvious that the more experienced a trainee is, the higher the training stress level should be to elicit progress.

There's also what's called an "optimal intensity threshold" (OIT) that must be surpassed if maximum hypertrophy is to be stimulated. You can use all the advanced methods in the world or perform sets until the cows come home, but if you don't train past that threshold you won't stimulate maximum growth.

The following table indicates the ideal training intensities, depending on the level of the trainee:

Experience Level Optimal Intensity Threshold Acceptable Intensity Range
Beginner 60% 50-70%
Intermediate 70% 60-80%
Advanced 80% 70-90%

Now understand that even if you train under the optimal intensity threshold (or even under the acceptable intensity range), you can still stimulate some muscle growth. However, this increase in muscle size will mostly be of the non-functional type. This is called sarcoplasmic hypertrophy and it refers to an increase in the elements of the muscle cell other than the muscle fibers. As a result of this type of hypertrophy, a muscle can get bigger but its strength won't improve much, if at all.

training-zones

This table displays the different training zones depending on the level of a trainee:

Number of repetitions (RM) for each training zone depending on the level of the trainee

Training Zone Beginner Intermediate Advanced
Strength 5
6
7
8
9
3
4
5
6
7
1
2
3
4
5
Functional Hypertrophy 10
11
12
8
9
10
6
7
8
9
Total Hypertrophy 13
14
15
16
11
12
13
14
9
10
11
12
13
Strength-Endurance 17
18
19
20
21
22
23
24+
15
16
17
18
19
20
21
22+
13
14
15
16
17
18
19
20+

For maximum muscle growth, a trainee should spend most of his training time in the functional and total hypertrophy zones. Training volume should be divided about 40//40 (percent-wise) between those two zones (normally use the functional hypertrophy zone for compound exercises and the total hypertrophy zone for isolation exercises).

Every once in a while (the other 20%), it'd be smart to spend some time in the strength zone because this will increase myogenic tone (muscle tonus), creating a more dense and hard look. It'll also increase the capacity of the nervous system to recruit muscle fibers which will enhance the effect of the subsequent bouts of hypertrophy training.

Strength-endurance work (especially when used with short rest intervals) can help with fat loss, vascularization, and even serve as active recovery if the loads used are very light.

The following table briefly explains the benefits of each training zone:

Training Zone Name Positive Effects
85-100% Limit strength Increase in strength
Stimulation of functional hypertrophy
Increase in muscle density
80-85% Functional hypertrophy Stimulation of functional hypertrophy
Increase in strength
70-80% Total hypertrophy Stimulation of total hypertrophy (functional + non-functional)
Slight increase in muscle endurance
Improved lactic acid tolerance
50-70% Strength-endurance Increase in non-functional hypertrophy
Increase in muscle endurance
Improved capilarization
- 50% Endurance-strength Increase in muscle endurance
Improved capilarization
Active recovery
Speeds up recovery from tendon injuries

Loading Patterns

A loading pattern refers to how the sets for one exercise are arranged. For example, straight sets will have you use the same weight and reps for all your work sets while wave loading, pyramidal loading, or plateau loading will vary the load and reps with each set. Let's take a look at each.

Straight Sets

When performing straight sets, you execute one or two warm-up sets then jump right into your working weight, which you maintain for the whole exercise. For example, let's say that your program calls for 4 x 6-8. You'd do:

  • 1 x 8 @ 90lbs (warm-up)
  • 1 x 8 @ 135lbs (warm-up)
  • 4 x 8 @ 185lbs (work sets)

It's possible that due to fatigue you won't be able to complete the 8 reps on your last set or two. That's why the prescription calls for 6-8 reps. I believe in giving a 2 rep "give" when designing a program. If you're in top shape and the program calls for 6 reps but you're able to do 8, isn't it better to go up to 8? Sure it is!

And if you're tired and are not able to perform the prescribed 8 reps, does it mean that you screwed up your workout? No, as long as you can stay within the 2 rep range you're fine.

Graphically, straight sets look like this (we'll keep our 4 x 6-8 example):

Straight Sets

Wave Loading

Wave loading refers to a loading pattern where the load and reps change with every set within a wave. A wave is a group of 2-3 sets. Normally 2 waves are performed when training for muscle size, while 2-4 waves can be used when training for strength. You should try to use heavier weights with each new wave.

When planning a hypertrophy wave, you want to have one of the two following patterns:

Hypertrophy Wave with Strength Gains

  • Set 1 – Total hypertrophy zone
  • Set 2 – Functional hypertrophy zone
  • Set 3 – Strength zone

Hypertrophy/Strength Wave

Set Beginner Intermediate Advanced
Set 1 15 reps 12 reps 10 reps
Set 2 12 reps 8 reps 6 reps
Set 3 8 reps 6 reps 4 reps
Set 4 15 reps 12 reps 10 reps
Set 5 12 reps 8 reps 6 reps
Set 6 8 reps 6 reps 4 reps

Hypertrophy Wave with Strength-endurance Gains

  • Set 1 – Strength-endurance zone
  • Set 2 – Total hypertrophy zone
  • Set 3 – Functional hypertrophy zone

Hypertrophy/Strength-Endurance Wave

Set Beginner Intermediate Advanced
Set 1 20 reps 18 reps 15 reps
Set 2 15 reps 12 reps 10 reps
Set 3 12 reps 10 reps 8 reps
Set 4 20 reps 18 reps 15 reps
Set 5 15 reps 12 reps 10 reps
Set 6 12 reps 10 reps 8 reps

When training for strength, one of the following wave patterns can be used:

Mixed Strength/Functional Hypertrophy Wave

  • Set 1 – Functional hypertrophy zone
  • Set 2 – Strength zone high end
  • Set 3 – Strength zone low end

>Mixed Strength/Functional Hypertrophy Wave

Set Beginner Intermediate Advanced
Set 1 10 reps 8 reps 6 reps
Set 2 8 reps 6 reps 4 reps
Set 3 6 reps 4 reps 2 reps
Set 4 10 reps 8 reps 6 reps
Set 5 8 reps 6 reps 4 reps
Set 6 6 reps 4 reps 2 reps

Mixed Relative/Limit Strength Wave

  • Set 1 – Strength zone high end
  • Set 2 – Strength zone middle
  • Set 3 – Strength zone low end

Mixed Relative/Limit Strength Wave

Set Beginner Intermediate Advanced
Set 1 9 reps 7 reps 5 reps
Set 2 7 reps 5 reps 3 reps
Set 3 5 reps 3 reps 2 reps
Set 4 9 reps 7 reps 5 reps
Set 5 7 reps 5 reps 3 reps
Set 6 5 reps 3 reps 2 reps

Relative Strength Wave

  • Set 1 – Strength zone middle
  • Set 2 – Strength zone low end
  • Set 3 – Strength zone low end

Relative Strength Wave

Set Beginner Intermediate Advanced
Set 1 7 reps 5 reps 3 reps
Set 2 6 reps 4 reps 2 reps
Set 3 4 reps 2 reps 1 reps
Set 4 7 reps 5 reps 3 reps
Set 5 6 reps 4 reps 2 reps
Set 6 4 reps 2 reps 1 reps

Pyramid Loading

The pyramid schemes are somewhat outdated but can still be used when training for muscle size (not so much when training for strength). In a regular pyramid you start with a higher number of reps and a lesser amount of weight, and with each set you increase the weight while reducing the reps. In an inverted pyramid you do the opposite: you start with a heavy weight for few reps, and decrease the load with each set while increasing the reps.

In a double pyramid you start like a regular pyramid: begin with higher reps and decrease them for your next 2-3 sets, then increase them again for your last set or two.

Here are some illustrations of what a pyramid pattern might look like:

Pyramid-Loading

Inverted-Pyramid-Loading

There are two problems with pyramid loading schemes. They either:

  1. Cause too much fatigue to make the heavy set effective (regular pyramid scheme)
  2. Start heavy too soon, when the CNS isn't properly activated (inverted pyramid)

Double-Pyramid-Loading

The double pyramid, which is somewhat similar to wave loading, is less problematic and should be the preferred pyramid pattern if you choose to use one.

Flat Pyramid Loading

This method is somewhat similar to regular pyramid loading in that the load is progressively increased with each set. However, the number of reps stays the same. This means that only the last 1-2 sets are actually true work sets while the other 2-3 are progressive warm-ups (they still have a training effect though).

This is the type of loading scheme used by Dorian Yates among others. It's often believed that Yates trained using HIT or Heavy Duty in which one performs only one set of an exercise to failure. Not so! Yates actually performed up to 5 sets of an exercise but only the last one was a true limit effort.

This method is interesting when training in the functional hypertrophy zone because it allows you to get your CNS and muscles geared up for a limit effort gradually without causing too much fatigue (which would impair the limit effort). However, in most cases, the "effective volume" (EV), or number of reps that are tough enough to cause an adaptation, is too low.

It's a nice change of pace when you've been doing high volume training for a long time though. For example, if a trainee has been on a high volume routine for 6-8 weeks, including 3-4 weeks of flat pyramid loading with a low volume of work will enable the body to recover from the previous bout of high volume work and a supercompensation effect will occur. This is called delayed adaptation.

The following table illustrates what a flat pyramid scheme might look like:

Set Beginner Intermediate Advanced
Set 1 10 reps @ 50% 8 reps @ 55% 6 reps @ 60%
Set 2 10 reps @ 55% 8 reps @ 60% 6 reps @ 65%
Set 3 10 Reps @ 60% 8 reps @ 65% 6 reps @ 70%
Set 4 10 Reps @ 65% 8 reps @ 70% 6 reps @ 75%
Set 5 10 reps @ 70% 8 Reps @ 75% 6 reps @ 80%

Plateau Loading

Plateau loading is somewhat similar to pyramid loading except for two differences:

There aren't as many different steps, and more than one set is performed at each step.

You basically perform different plateaus (2 to 4), each one having 2 sets at the same training load and reps. After a plateau you can start another one either of a higher intensity or of a lower intensity level. Here are some examples:

Example of a Simple Progressive Plateau

Set Beginner Intermediate Advanced
Set 1 12 reps 10 reps 8 reps
Set 2 12 reps 10 reps 8 reps
Set 3 10 reps 8 reps 6 reps
Set 4 10 reps 8 reps 6 reps
Set 5 8 reps 6 reps 4 reps
Set 6 8 reps 6 reps 4 reps

Example of a Simple Regressive Plateau

Set Beginner Intermediate Advanced
Set 1 8 reps 6 reps 4 reps
Set 2 8 reps 6 reps 4 reps
Set 3 10 reps 8 reps 6 reps
Set 4 10 reps 8 reps 6 reps
Set 5 12 reps 10 reps 8 reps
Set 6 12 reps 10 reps 8 reps

Example of a Double Progression Plateau

Set Beginner Intermediate Advanced
Set 1 10 reps 8 reps 6 reps
Set 2 10 reps 8 reps 6 reps
Set 3 8 reps 6 reps 4 reps
Set 4 8 reps 6 reps 4 reps
Set 5 12 reps 10 reps 8 reps
Set 6 12 reps 10 reps 8 reps

I personally prefer the double progression plateau because it allows you to be properly prepared for the heavier sets while not being too fatigued to perform well.

Conclusion

As you can see, there's more than one way to get big and strong muscles! But if you understand the basic scientific principles behind the whole process, you'll be better equipped to design effective and efficient training programs. Now go do it!

Christian Thibaudeau specializes in building bodies that perform as well as they look. He is one of the most sought-after coaches by the world's top athletes and bodybuilders. Check out the Christian Thibaudeau Coaching Forum.