Unleash the Power of the Jump Squat
Successful strength coaches tend to rely on exercises that offer the most bang for the buck. This explains the predominance of no-nonsense staples like bench presses, squats, and deadlifts in their strength training routines, with nary a triceps kickback variation to be found.
Another big bang exercise that receives a fraction of the attention it deserves is the jump squat.
You've probably never seen anyone perform jump squats or even heard of the exercise, which is a low down dirty shame. The jump squat is the ultimate combination exercise and it's a real ass kicker to boot, taking the mechanics of a squat and adding the power component of a jump.
Some coaches have publically praised the jump squat for its ability to effectively develop lower body power, yet to the mainstream lifter it remains in relative exercise obscurity.
The main issues are the jump squat's awkward setup (placing a loaded barbell on your back and jump), and seemingly steep learning curve.
For the former, tools like dumbbells, weight plates, weight vests, and sandbags are much easier to handle while allowing for more natural jumping mechanics.
Regarding the latter, the jump squat is actually a very simple movement to learn, especially when compared to the clean or snatch as there's no need to catch the weight. Just grab a weight and jump – it can't get much simpler than that.
Power is Strength
Jump squats have been shown to improve lower body power output over resistance training or stand-alone box jumps (3-4). Increased power generally translates to an increased 1RM.
To that end, the absence of power movements in your training could be the limiting factor in your squats. If you're not training in some way to create force as fast as possible, then you're limiting the firing rate of muscle action and as a result, leaving weight on the rack.
The quicker you can recruit your entire lower body into the squat, the greater force you can produce, and ultimately the more weight you can move.
Safe to Start?
If you can jump and it doesn't hurt, you're safe to jump squat. However, once you begin loading the lift, the risk for injury is greatly amplified. Learning proper landing mechanics becomes top priority.
Here's the quick and dirty:
- Follow a normal squat pattern with your feet shoulder-width apart.
- Once you reach squat depth, explode up.
- Upon landing, focus on keeping the chest up and track your hips back behind you.
- Absorb the impact – don't try to take the blunt force. Make sure that your knees don't cave in.
If there's any knee deviation inside of the midline of the ankle, don't continue. Get your glutes firing first.
- Once you feel confident in your landings, start loading the exercise with sandbags or dumbbells.
- Jump with the weight in your hands but ditch the weight before landing. Throw the weight beside you or to the front if it's a sandbag.
Why dump the weight? You still increase power but you're not stressing the fibers as much (5). Basically, it's neural system training at its finest!
Don't worry, after a few weeks you can start increasing the difficulty with other loading methods.
Suit Up to Level Up
Once you've mastered the unloaded landing, using a weighted vest is the next progression. The weighted vest is the most "natural" as it allows you to perform a loaded jump without restricting arm motion.
- Perform the same jump squat but now absorb the load when landing.
- After landing, brace and absorb the stress into an athletic stance and repeat.
After getting proficient with the weight vest you can move back to the dumbbells or sandbags. This is essentially the same movement as before only now you hold the weights when you land. A combination of the two (weights plus vest) may be used to reach the prescribed load.
The eccentrically loaded portion of the lift adds a greater force component to the exercise and creates greater stability in landing (5). This transfers to the field by improving the ability to absorb hits, recover from sprinting, and show stability in cutting, not to mention a heavier squat in the weight room (3).
Barbell Jump Squats
The final progression is the actual barbell jump squat. Using a barbell allows exceptionally heavier loads to be used versus dumbbells and weight vests. Trying to achieve very heavy loading with heavy dumbbells eventually hurts your knees. In short, stick with the barbell.
The bar should remain on the upper back. Pulling down on the bar as you jump keeps it from flying up and crashing down on your neck. Use a bar pad if needed to disburse the load.
Barbell jump squats remove all arm action from the movement. However, you gain true lower body power development in return, so there's a lot to gain if the correct load and technique is used.
Selecting the Appropriate Load
Progressive overload is the basis for all strength training, even jump squats. However, attempting to progress too fast or starting with heavier weights than needed is a great way to end up with disc compressions and torn ACL's.
Although elite athletes have reported using as much as 60% of 1RM for the movement, this definitely isn't a safe place to start (6). Selecting the appropriate load should be based off a percentage of your 1RM back squat. This provides a manageable load that's safe to jump with, and more importantly, land.
A study showed that 55-59% of 1RM had the greatest output of power in trained individuals (6) and that loads of around 45% of 1RM produced similar results. This makes being able to handle sets of 3-5 jumps with 45% of squat max an appropriate starting goal.
Start with 20% of your 1RM – be it with sandbags or dumbbells – and work on the unloaded landing style of jump squat. Then, progress to a weighted vest with a heavier load and work on the loaded landing. A combination of dumbbells and the vest can be used if 20% of your max can't be reached with just the vest.
With barbell jump squats, warm-up with 30% of your max for a set of 3-5 jumps. Then progress from 30% up to 45% while also working on mobility work specific to your imbalances.
You now have a thorough progression to the jump squat. So let's get to the program.
Perform the following after your lower body workout:
|A1||Jump Squat Sandbag Unloaded Landing||20||3||3|
|A2||Single-Leg Hip Lift||3||12|
|A1||Jump Squat Weight Vest||20||3-4||4-5|
|A2||Mobility Work Based on Needs|
|A1||DB Jump Squat (Loaded Landing)||30||5||3|
|A2||Mobility Work Based on Needs|
|A1||Barbell Jump Squat||30-45||5||3-5|
|A2||Mobility Work Based on Needs|
Although you'd be hard-pressed to find anyone doing them at 24 Hour Fatness, jump squats are an outstanding way to develop lower body power while effectively training triple extension of the hips, knees, and ankles. This can translate to both new PR's in the gym and big results on the field.
From a bang for your buck perspective, the power development derived from jump squatting can save hours in unnecessary training as you get the resistance training effect of squatting while developing dynamic power with the jump, all in a short learning curve.
This not only sets jump squats apart from other power movements, but makes them a must-learn exercise for your repertoire. Just remember to ensure proper landing mechanics and to select an appropriate load.
For all the misguided fears about the exercise's safety, the real beauty of the movement is its simplicity: if you can squat and jump, you can jump squat.
1. Dayne, A.M., et al., Power Output in the Jump Squat in Adolescent Athletes. Journal of Strength & Conditioning Research (Lippincott Williams & Wilkins), 2011. 25(3): p. 585-589.
2. McBride, J.M., T.L. Haines, and T.J. Kirby, Effect of loading on peak power of the bar, body, and system during power cleans, squats, and jump squats. Journal Of Sports Sciences, 2011. 29(11): p. 1215-1221.
3. Khlifa, R., et al., Effects of a plyometric training program with and without added load on jumping ability in basketball players. Journal Of Strength And Conditioning Research / National Strength & Conditioning Association, 2010. 24(11): p. 2955-2961.
4. Prue, C., G.O. McCaulley, and J.M. McBride, Power Versus Strength-Power Jump Squat Training: Influence on the Load-Power Relationship. Medicine & Science in Sports & Exercise, 2007. 39(6): p. 996-1003.
5. Hori, N., et al., Comparison of Jump Squat Training with and without Breaking. Journal of Strength & Conditioning Research (Lippincott Williams & Wilkins), 2008. 22(1): p. 54-65.
6. Baker, D., S. Nance, and M. Moore, The load that maximizes the average mechanical power output during jump squats in power-trained athletes. Journal Of Strength And Conditioning Research / National Strength & Conditioning Association, 2001. 15(1): p. 92-97.
Other Articles by Author
Brad Longazel, MS, CSCS, USAW, ACSM, is a strength coach and has worked in physical therapy clinics as well as strength and conditioning facilities. He holds certifications from the National Strength and Conditioning Association and American College of Sports Medicine and is recognized as an Olympic weightlifting coach by the U.S. Weightlifting Association. Brad earned his master's degree in exercise physiology from the University of Louisville. He is also the co-owner and founder of the Complete Performance Institute based in Louisville, Kentucky.